The durable and modern greenhouse “Maria” was designed specifically for the Siberian regions - it has high-quality component materials, a resistant profile pipe 20x20 mm and the ability to withstand enormous loads: wind up to 22 m/s and snow up to 40 kg/m2. And its dimensions are as follows: height - 2.1 m, width - 3.0 m and length 4, 6 and 8 meters. The new Maria Deluxe greenhouse is an even more improved version for cold regions. In its reinforced version, it is made of profile pipes with a cross-section of 20x30 mm, and in the usual version - 20x20 mm. If you are looking for polycarbonate greenhouses in Khabarovsk, “Maria” is one of the best options in terms of price, quality, and parameters for this particular region or similar ones.
Features of the reinforced greenhouse Maria Deluxe
Some summer residents who have not previously worked with greenhouses may be asking questions: Maria Deluxe reinforced greenhouse - what is it? Is there a real need for it?
The design of the Maria Deluxe model is specially thought out for people - even a gardener who has never dealt with greenhouses can handle its assembly without unnecessary hassle. But you can be completely sure that the seedlings will not die in any form of bad weather, because this greenhouse is endowed with an excellent level of heat retention and is ideal for harsh climates.
The structure itself consists of a frame and covering material. The frame is made of metal profiles that are connected using clamps. Cellular polycarbonate is used for the covering - the most popular material used for covering greenhouses for the winter.
Thanks to the material and shape of the greenhouse, the metal profile has increased resistance to strong wind, rain and snow. And the polymer coating of the frame protects it from corrosion. Polycarbonate, among other things, has the ability to withstand severe weather and heavy loads.
The diameter of the metal profile is 2 centimeters. Despite its relatively small size, the frame of the Maria Deluxe greenhouse can easily withstand wind gusts exceeding 20 meters per second or withstand a layer of snow weighing up to 40 kilograms per “square”.
The standard parameters of the greenhouse are:
- height – 2.1 m;
- width – 3 m;
- length – 4.6 or 8 m.
https://youtu.be/https://www.youtube.com/watch?v=0KrI6KfTnQQ
_
Tips for choosing and using polycarbonate
If the “Maria Deluxe” greenhouse was purchased only in the form of a frame, then you need to buy the covering material yourself. The film is not suitable for this greenhouse; the design is designed for polycarbonate.
When choosing polycarbonate, it is better to choose colorless sheets with ultraviolet coating. With such protection, the material will last at least 10 years, and without it - only 2-3 years. The optimal thickness of polycarbonate for greenhouses is 4-6 mm. If it is less, then the sheets will not withstand snow loads in the cold season, and if it is more, they will be too heavy for the greenhouse. Sheets larger than 6 mm cannot be rolled into rolls and are more difficult to install due to the lack of plasticity.
To prevent the polycarbonate coating from becoming cloudy over time due to insects and dust getting into its honeycombs, it is necessary to use an end profile when assembling the case, which can be purchased separately, or periodically seal the gaps with tape.
If you are not sure that you can assemble the Maria Deluxe greenhouse yourself, then it is better to seek help from professionals who will quickly and reliably install the greenhouse, saving you from unnecessary hassle.
Advantages of the Maria Deluxe greenhouse
The design has many advantages, among which the following points can be particularly highlighted:
- If necessary, the greenhouse can be moved to another area.
- The finished greenhouse looks beautiful and therefore will easily fit into any site design.
- If you follow all the instructions, you can easily assemble the greenhouse yourself.
- Due to the strong fastening of the coating, the soil warms up faster, which means that vegetables can be planted earlier than expected.
- Non-monolithic nature makes the frame more flexible, which prevents damage.
- Precipitation will not accumulate on the surface of the structure.
- The dimensional parameters of the greenhouse allow a person to go inside and take care of the plants with his own hands.
Among the shortcomings, the only one that stands out is the long assembly process. But if you strictly follow the instructions, there will be no problems. So, how to assemble a reinforced model of the Maria Deluxe greenhouse step by step and without errors with your own hands?
Advantages
The main advantage of the Maria Deluxe greenhouse is its very convenient shape with straight sides and an arched roof, thanks to which snow will not accumulate on the greenhouse in winter. Also, the special shape makes it possible to plant plants near the walls of the greenhouse, which saves space. Due to the material chosen by the manufacturer, the structure may sag under strong snow pressure. However, as practice shows, due to the shape of the roof this happens very rarely.
A distinctive feature from other greenhouses of all kinds, as well as a huge advantage of the greenhouse, is the method of fastening. The greenhouse is secured using special plates and bolts. This adds stability to the structure. Most summer residents and gardeners choose Maria Deluxe greenhouses because of the possibility of convenient ventilation and watering in the greenhouse. This is all thanks to the windows located on both sides and the doors.
And due to such an advantage as the factory coating of the frame with a frost-resistant polymer, the possibility of corrosion on the metal frame is significantly reduced. This allows you to use the greenhouse not only in spring and autumn, but also in severe frosts. Since a high level of moisture, strong wind and frost are not at all scary for such a greenhouse.
Installation instructions
The store-bought kit includes:
- bolts and fastening parts;
- metal frame - arched and straight profile pipes;
- polycarbonate roll - standard panel size 6 by 2.1 meters.
Large vehicles are required for transportation. For example, a minibus. If necessary, the finished greenhouse can also be easily disassembled and then moved to a new site.
To assemble the structure you will need:
- set of wrenches;
- set of drills;
- knife;
- pliers;
- roulette;
- screwdriver
Foundation
First of all, a completely flat area is required for installation. Do-it-yourself assembly technology does not require a foundation. It is enough to use special supports that are driven directly into the soil. But if moving the greenhouse is not planned and it is installed for a long period of time, experts advise making a reliable foundation. It can be concrete, wood or brick.
If you decide to mount directly on the ground, experts recommend strengthening the supports with wooden blocks. This will make the support more stable. Impregnation with an antiseptic will protect the wood from rotting and drying out.
Ideally, two people will be needed to assemble the greenhouse. One should hold the frame and material, and the second should secure the clamps.
Frame
The greenhouse frame is assembled in strict sequence:
- It is necessary to take measurements using a tape measure to mark points for supports. The step between the arcs should be 1 meter.
- Parts and fastenings must be unpacked and laid out around the perimeter of the base or along an already prepared foundation.
- During installation, the lower beams and lintels are connected with self-tapping screws and three-sided brackets. When attaching the base to the foundation, the screws should not be screwed all the way. You need to leave about a centimeter so that you can later align the structure during assembly.
- Next, the mounting clamps and end elements are installed. On the lower beams, using a marker, it will be convenient to mark points for securing the arches, and then install connecting clamps in them.
- The longitudinal beams and arches are combined using fasteners, and three-sided clamps are placed on the base, after which the end sides are installed in them.
- The main frame is being assembled. Brackets are mounted at the points where the arcs are located. The frame arcs must be inserted into them and secured with bolts.
- The last step is to install the upper longitudinal beams using cross-shaped brackets. These fasteners secure arches, floors and beams.
Having fixed all the parts, you need to independently check the fastenings for strength and make sure that the greenhouse has not tilted and remains standing in place. A visual installation video will help you better understand certain points.
https://youtu.be/https://www.youtube.com/watch?v=4bR9J1FAJrA
_
To prevent distortion of the structure during the assembly process, it is advisable to check the quality of the connections after each completed item using a building level in order to immediately correct the slightest defects “hot on the heels”. Curvatures in the frame will make the greenhouse unstable and complicate the opening of the door and vents, causing gaps to appear. Only after making sure that the frame is assembled smoothly can you fully tighten the screws at the base of the greenhouse. Frame diagram is attached.
Characteristics and Features
The kit is a strong frame that can withstand the most adverse weather conditions.
The structure is made of lightweight materials, making it easy to assemble on site according to the instructions. The finished greenhouse has: a base made of light wood, which reduces the overall load on the ground;
Thanks to its wooden base, Maria Deluxe has minimal load on the ground
- sloping roof - one side is curved into an arch to prevent precipitation from accumulating, the opposite side rises above the base at an angle of 90°, which is convenient for planting plants directly next to the wall;
- two doors and windows on both sides for convenient watering and ventilation.
The structure is sheathed with lightweight polycarbonate. The individual parts are connected by wear-resistant plates equipped with bolts.
How to care for the Maria Deluxe greenhouse
Assembling a greenhouse is not difficult. Many summer residents are only looking for advice on how to properly assemble a greenhouse, but practice shows that with further use, errors very often arise due to ignorance.
First of all, you should carefully consider the fastening system. After all, it bears the main burden. On the one hand, it will help restrain strong gusts of wind, and on the other hand, it can accelerate the destruction of the greenhouse.
When assembling the frame, you need to be careful, and then the reinforced frame will retain its properties for a long time. The fact is that each fastener has a mark indicating the limits of fixation. All necessary fastening parts are supplied complete with housing and cover parts.
As reviews from summer residents show, complaints about polycarbonate arise much more often. The material periodically wears out, and certain areas of the coating need restoration. Most often, polycarbonate is chosen as a covering material for greenhouses for its functionality and simplicity.
As an alternative, you can subsequently choose any other matter. But only with similar characteristics. If you use coatings with different parameters and properties, this will not benefit the strength of the greenhouse. Experts advise purchasing a small supply of polycarbonate. If only because during the cutting process no one is immune from mistakes that will require starting the cutting all over again.
In order for the Maria Deluxe greenhouse to last long enough, it is important to regularly carry out preventive inspections. In particular:
- Once every six months, you need to thoroughly lubricate all fasteners.
- After a strong storm, rain or blizzard, you need to carry out an external inspection to immediately eliminate possible damage.
- If any element breaks, it should be replaced as soon as possible, before this leads to more serious damage.
Assembly technology
To ensure enhanced plant protection in winter, it is necessary to assemble the greenhouse correctly, because the slightest mistake can lead to poor frost resistance or poor stability of the frame. The entire frame of the greenhouse is completely disassembled. Its kit includes arcuate and straight elements, which are fastened with strong bolts. By the way, thanks to this frame format, the greenhouse can easily fit in the trunk of a car, of course, disassembled. In addition, it is quite light for a greenhouse of this size.
Of course, you can call specialists and they will be able to assemble the structure in just a few hours, but since Maria Deluxe is easy to assemble, you can easily do it yourself. To do this you will need special tools:
- mallet;
- wrenches sizes 8 and 10;
- stationery knife;
- screwdriver;
- roulette;
- pliers;
- screwdriver
The second tip is quality tools for assembly. Using dull drills can easily damage polycarbonate. I also recommend that gardeners reinforce the sides of greenhouses to add stability during strong winds and frosts. To do this, additional struts are placed on all sides, which will allow the greenhouse to be supported even in the most severe storm.
Adhering to all the rules and recommendations, the Maria Deluxe greenhouse can last for many years and also survive severe storms and loads. And with proper installation, you will enjoy fresh herbs and vegetables every day. Moreover, everyone can assemble the Maria Deluxe structure, even those who rarely hold tools in their hands, and it will not take much valuable time.
